| Campaign Number | Recall Initiator | Potentially Affected | Components | Manufacturer | Automotive Manufacturer | Report Received Date | Recall Description | Consequence Summary |
|---|---|---|---|---|---|---|---|---|
| 12V345000 | MFR | 598 | FUEL SYSTEM, GASOLINE | COLLINS BUS CORPORATION | Collins Bus Corporation | 2012-07-19 | Collins is recalling certain model year 2012 Collins, Corbeil, and Mid-Bus school bus and multi-function school activity buses, models SL400, SH400, DH400, DH416 with 139" wheel base and two-passenger seat set at 24, 25, 26, 27, or 28" hip to knee spacing and three-passenger seat set at 24, 25, or 26" hip to knee spacing and model year 2012 DH500 and DH516 with 159" wheel base and two-passenger seat set at 28 or 29" hip to knee spacing and three-passenger seat set at 27, 28, or 29" hip to knee spacing. These buses were manufactured from March 12, 2012, through September 20, 2012. In some floor plans on these models of buses, there is the possibility that the fuel filler hose was damaged during seat or seat track installation or that a seat bolt and/or the seat bolt bracket interferes with the routing of the fuel fill hose. The fuel fill hose runs from the exterior of the bus, through a housing in the bus, then under the bus and toward the fuel tank. Some floor plans have a seat or track bolt that comes through the floor near the area where the hose crosses the chassis frame. In addition to possible damage during installation, there is a chance that the bolt or the bracket can abrade or puncture the hose in this area. | If the integrity of this hose is breached, fuel could spill. In the case of gasoline or diesel vehicle, fuel could spill during fueling operations or in the event of a crash, increasing the risk of a fire. In the case of a propane vehicle, propane gas could be released during fueling operations (check valves prevent release from the tanks) creating the risk of a fire during filling. |
FUEL SYSTEM, GASOLINE: 100%
Automotive recall is the process in which a vehicle manufacturer or government agency requests that a vehicle owner return the vehicle to a repair facility for the purpose of correcting a safety defect or non-compliance with federal safety standards. This process is initiated by the manufacturer or government agency when it is determined that a safety defect or non-compliance with federal safety standards exists in a particular vehicle or group of vehicles. The vehicle owner is notified of the recall by mail, and the repair is performed at no cost to the owner. The goal of an automotive recall is to prevent accidents and injuries caused by the defect or non-compliance issue.
Yes, you can use your vehicle identification number (VIN) to check for recalls. Most vehicle manufacturers have a website or a phone number that you can use to check for recalls using your VIN. In addition, we also provide recall inquiry, you only need to provide REGO or VIN to get a vehicle report
Some vehicle recalls may even pose a major threat to the lives of drivers and passengers, such as the Takata airbag recall. Check the recalls of your car is necessary.
Takata airbag recall is a recall of vehicles equipped with Takata airbag inflators. The recall was initiated by the National Highway Traffic Safety Administration (NHTSA) in 2014 and has since expanded to include millions of vehicles from various manufacturers. The recall was necessary because it was discovered that the Takata airbag inflators could rupture upon deployment, potentially causing metal shards to be propelled into the vehicle cabin, resulting in serious injury or death to the vehicle occupants. The NHTSA recommends that vehicle owners check for recalls on their vehicles and have any identified defects corrected as soon as possible to ensure their safety.
Users can use our online service to check whether a vehicle is affected by the Takata airbag recall.
Copyright © 2022.AUCN All rights reserved.