Click to view content
| Campaign Number | Recall Initiator | Potentially Affected | Components | Manufacturer | Automotive Manufacturer | Report Received Date | Recall Description | Consequence Summary |
|---|---|---|---|---|---|---|---|---|
| 80V084000 | MFR | 6214 | SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES | HARLEY-DAVIDSON MOTOR CO. | Harley-Davidson Motor Company | 1980-07-24 | ON CERTAIN VEHICLES, THE REAR BRAKE CONTROL MAY DISENGAGE FROM THE FRAME DUE TO STRESSES PRIMARILY CAUSED BY THE LENGTH OF THE BRAKE CONTROL MOUNTING BOLTS. | |
| 80V085000 | MFR | 4690 | WHEELS:LUGS/NUTS/BOLTS | HARLEY-DAVIDSON MOTOR CO. | Harley-Davidson Motor Company | 1980-07-07 | ON CERTAIN VEHICLES THERE MAY BE A GRADUAL LOOSENING OF THE REAR SPROCKET BOLT(S) AND A DECREASE IN THE CLAMPING FORCE NECESSARY TO MAINTAIN A SECURE ATTACHMENT OF THE REAR WHEEL SPROCKET TO THE WHEEL. | |
| 80V126000 | MFR | 4262 | SUSPENSION:FRONT:WHEEL BEARING | HARLEY-DAVIDSON MOTOR CO. | Harley-Davidson Motor Company | 1980-09-24 | THE WHEEL BEARINGS ON THE INVOLVED MOTORCYCLES MAY HAVE HAD INADEQUATE INITIAL BEARING LUBRICATIONS AND SEALING. DEPENDING ON THE DEGREE OF INSUFFICIENT LUBRICATION, THIS PROBLEM COULD CAUSE FAILURE OF THE FRONT AND/OR REAR WHEEL BEARINGS. | |
| 80V070000 | MFR | 3860 | STEERING:COLUMN LOCKING:ANTI-THEFT DEVICE | HARLEY-DAVIDSON MOTOR CO. | Harley-Davidson Motor Company | 1980-05-29 | THE ADJUSTING SCREW, WHICH MOUNTS THROUGH A FORK LOCK LEVER ASSEMBLY INTO THE FORK LOCK ITSELF, MAY NOT BE FULLY AND SECURELY ENGAGED BECAUSE THE SCREW MAY NOT BE LONG ENOUGH. THIS MAY ALLOW THE FORK PIN TO DROP AND ACCIDENTALLY ENGAGE THE FORK LOCK. | |
| 80V037000 | MFR | 2440 | ELECTRICAL SYSTEM:IGNITION:SWITCH | HARLEY-DAVIDSON MOTOR CO. | Harley-Davidson Motor Company | 1980-03-31 | THERE IS A POTENTIAL MALFUNCTION WITHIN THE FORK LOCK PIN RETURN MECHANISM WHICH MIGHT ALLOW THE FORK PIN TO DROP AND INADVERTENTLY ENGAGE THE FORK LOCK DURING LEFT HAND TURNS AT LOW SPEEDS. | |
| 80V009000 | MFR | 1343 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER | HARLEY-DAVIDSON MOTOR CO. | Harley-Davidson Motor Company | 1980-02-14 | THE REAR BRAKE CALIPER CASTING ON CERTAIN VEHICLES COULD BE POROUS AND COULD ALLOW BRAKE FLUID TO SEEP FROM THE CALIPER ASSEMBLY. IF THIS OCCURS, THE REAR BRAKES WILL GRADUALLY LOSE FLUID AND PRESSURE. | |
| 80V020000 | MFR | 62 | POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT | HARLEY-DAVIDSON MOTOR CO. | Harley-Davidson Motor Company | 1980-02-26 | ON CERTAIN MOTORCYCLES, THE HEAD OF THE REAR WHEEL SPROCKET MOUNTING BOLT COULD BREAK OFF AND EVENTUALLY WEDGE ITSELF BETWEEN THE ALUMINUM CHAIN HOUSING AND THE SPROCKET. THIS DEFECT IS DUE TO A MANUFACTURING PROCESS WHICH MAY CAUSE THE BOLTS TO BECOME BRITTLE. |
SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES: 14.285714285714% WHEELS:LUGS/NUTS/BOLTS: 14.285714285714% SUSPENSION:FRONT:WHEEL BEARING : 14.285714285714% STEERING:COLUMN LOCKING:ANTI-THEFT DEVICE: 14.285714285714% ELECTRICAL SYSTEM:IGNITION:SWITCH: 14.285714285714% SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER: 14.285714285714% POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT: 14.285714285714%
Automotive recall is the process in which a vehicle manufacturer or government agency requests that a vehicle owner return the vehicle to a repair facility for the purpose of correcting a safety defect or non-compliance with federal safety standards. This process is initiated by the manufacturer or government agency when it is determined that a safety defect or non-compliance with federal safety standards exists in a particular vehicle or group of vehicles. The vehicle owner is notified of the recall by mail, and the repair is performed at no cost to the owner. The goal of an automotive recall is to prevent accidents and injuries caused by the defect or non-compliance issue.
Yes, you can use your vehicle identification number (VIN) to check for recalls. Most vehicle manufacturers have a website or a phone number that you can use to check for recalls using your VIN. In addition, we also provide recall inquiry, you only need to provide REGO or VIN to get a vehicle report
Some vehicle recalls may even pose a major threat to the lives of drivers and passengers, such as the Takata airbag recall. Check the recalls of your car is necessary.
Takata airbag recall is a recall of vehicles equipped with Takata airbag inflators. The recall was initiated by the National Highway Traffic Safety Administration (NHTSA) in 2014 and has since expanded to include millions of vehicles from various manufacturers. The recall was necessary because it was discovered that the Takata airbag inflators could rupture upon deployment, potentially causing metal shards to be propelled into the vehicle cabin, resulting in serious injury or death to the vehicle occupants. The NHTSA recommends that vehicle owners check for recalls on their vehicles and have any identified defects corrected as soon as possible to ensure their safety.
Users can use our online service to check whether a vehicle is affected by the Takata airbag recall.
Copyright © 2022.AUCN All rights reserved.