Campaign Number | Recall Initiator | Potentially Affected | Components | Manufacturer | Automotive Manufacturer | Report Received Date | Recall Description | Consequence Summary |
---|---|---|---|---|---|---|---|---|
15V451000 | ODI | 193484 | SUSPENSION:FRONT:CONTROL ARM:LOWER ARM | Mazda North American Operations | Mazda Motor Corp. | 2015-07-20 | Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. | Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash. |
18V717000 | ODI | 155436 | AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE | Mazda North American Operations | Mazda Motor Corp. | 2018-10-12 | Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 CX-7, and 2011-2015 CX-9 sold, or ever registered in the states of Arizona, Arkansas, Delaware, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, West Virginia and the District of Columbia, or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 CX-7, and 2010-2015 CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. | An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death. |
16V203000 | MFR | 578 | STEERING | Mazda North American Operations | Mazda Motor Corp. | 2016-04-11 | Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate. | If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash. |
SUSPENSION:FRONT:CONTROL ARM:LOWER ARM: 33.333333333333% AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE: 33.333333333333% STEERING: 33.333333333333%
Automotive recall is the process in which a vehicle manufacturer or government agency requests that a vehicle owner return the vehicle to a repair facility for the purpose of correcting a safety defect or non-compliance with federal safety standards. This process is initiated by the manufacturer or government agency when it is determined that a safety defect or non-compliance with federal safety standards exists in a particular vehicle or group of vehicles. The vehicle owner is notified of the recall by mail, and the repair is performed at no cost to the owner. The goal of an automotive recall is to prevent accidents and injuries caused by the defect or non-compliance issue.
Yes, you can use your vehicle identification number (VIN) to check for recalls. Most vehicle manufacturers have a website or a phone number that you can use to check for recalls using your VIN. In addition, we also provide recall inquiry, you only need to provide REGO or VIN to get a vehicle report
Some vehicle recalls may even pose a major threat to the lives of drivers and passengers, such as the Takata airbag recall. Check the recalls of your car is necessary.
Takata airbag recall is a recall of vehicles equipped with Takata airbag inflators. The recall was initiated by the National Highway Traffic Safety Administration (NHTSA) in 2014 and has since expanded to include millions of vehicles from various manufacturers. The recall was necessary because it was discovered that the Takata airbag inflators could rupture upon deployment, potentially causing metal shards to be propelled into the vehicle cabin, resulting in serious injury or death to the vehicle occupants. The NHTSA recommends that vehicle owners check for recalls on their vehicles and have any identified defects corrected as soon as possible to ensure their safety.
Users can use our online service to check whether a vehicle is affected by the Takata airbag recall.
Copyright © 2022.AUCN All rights reserved.