Recalls Of 2008 MAZDA TRIBUTE

Click to view content

Campaign NumberRecall InitiatorPotentially AffectedComponentsManufacturerAutomotive ManufacturerReport Received DateRecall DescriptionConsequence Summary
12V357000ODI217500ENGINE AND ENGINE COOLINGMAZDA NORTH AMERICAN OPERATIONSMazda Motor Corp.2012-07-27Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death.
14V282000MFR33000STEERING:ELECTRIC POWER ASSIST SYSTEMMazda North American OperationsMazda Motor Corp.2014-05-29Mazda North American Operations (Mazda) is recalling certain model year 2008-2011 Tribute vehicles manufactured October 5, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the system could remove the Electric Power Steering (EPS) assist. If power steering assist is lost, greater driver effort would be required to steer the vehicle at low speeds, increasing the risk of a crash.
15E045000MFR576SUSPENSION:FRONT:WHEEL BEARING Timken CompanyMazda Motor Corp.2015-06-03The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension, and 39mm width, instead of a 42mm bore, 78mm outer dimension and a 45mm width.Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.
14V552000MFR423HYBRID PROPULSION SYSTEMMazda North American OperationsMazda Motor Corp.2014-09-10Mazda North American Operations (Mazda) is recalling certain model year 2008 Mazda Tribute Hybrid vehicles manufactured October 10, 2006, to May 23, 2008. The coolant pump for the hybrid system may fail, resulting in the hybrid electronics overheating.If the hybrid electronics system overheats, it may shut down the powertrain, resulting in a stall-like condition, increasing the risk of a crash.
15V677000MFR4POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)Mazda North American OperationsMazda Motor Corp.2015-10-19Mazda North American Operations (Mazda) is recalling certain model year 2008 Tribute vehicles manufactured February 9, 2007 to April 22, 2008. The affected vehicles have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15, 2015. These service repair part transmissions have a shift lever bolt that may not be properly tightened. As a result, the shift control lever could disengage from the transmission without warning. If the shift lever disengages from the transmission, a driver may be unable to shift gear positions and the indicated shift position may not represent the gear position the vehicle is in. Should a disengagement occur while the vehicle is being driven, when the driver goes to stop and park the vehicle, the gear selection indicator may show that the transmission is in the "PARK" position, but the vehicle transmission may not actually be in the "PARK" gear position. If the vehicle is not in the "PARK" position there is a risk the vehicle will roll away as the driver and other occupants exit the vehicle or anytime thereafter. A vehicle rollaway increases the risk of injury to exiting occupants and bystanders.

The chart shows the type and proportion of 2008 MAZDA TRIBUTE recalls initiated so far. So far, 251,503 2008 MAZDA TRIBUTE are at risk of recall

ENGINE AND ENGINE COOLING: 20% STEERING:ELECTRIC POWER ASSIST SYSTEM: 20% SUSPENSION:FRONT:WHEEL BEARING : 20% HYBRID PROPULSION SYSTEM: 20% POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL): 20%

Why You Should Get a Car History Report?

hide issue

1 in 4 used cars sold hide a potential issue

write off

1 in 16 cars have been recorded as a write off

stolen

every 9 mins a vehicle in Australia is stolen

Takata airbag recall

1 in 10 cars under a Takata airbag recall

odometer discrepancy

1% have evidence of an odometer discrepancy

organization

AUCN is Australia's best car history report provider

Data From:

Q&A

  • What is a Car Recall?

    Automotive recall is the process in which a vehicle manufacturer or government agency requests that a vehicle owner return the vehicle to a repair facility for the purpose of correcting a safety defect or non-compliance with federal safety standards. This process is initiated by the manufacturer or government agency when it is determined that a safety defect or non-compliance with federal safety standards exists in a particular vehicle or group of vehicles. The vehicle owner is notified of the recall by mail, and the repair is performed at no cost to the owner. The goal of an automotive recall is to prevent accidents and injuries caused by the defect or non-compliance issue.

  • Can I Use My VIN Number To Check For Recalls?

    Yes, you can use your vehicle identification number (VIN) to check for recalls. Most vehicle manufacturers have a website or a phone number that you can use to check for recalls using your VIN. In addition, we also provide recall inquiry, you only need to provide REGO or VIN to get a vehicle report

  • How to Check Recalls by Rego?

    Some vehicle recalls may even pose a major threat to the lives of drivers and passengers, such as the Takata airbag recall. Check the recalls of your car is necessary.

  • How to Check for a Takata Airbag Recall?

    Takata airbag recall is a recall of vehicles equipped with Takata airbag inflators. The recall was initiated by the National Highway Traffic Safety Administration (NHTSA) in 2014 and has since expanded to include millions of vehicles from various manufacturers. The recall was necessary because it was discovered that the Takata airbag inflators could rupture upon deployment, potentially causing metal shards to be propelled into the vehicle cabin, resulting in serious injury or death to the vehicle occupants. The NHTSA recommends that vehicle owners check for recalls on their vehicles and have any identified defects corrected as soon as possible to ensure their safety.

    Users can use our online service to check whether a vehicle is affected by the Takata airbag recall.

Image

Copyright © 2022.AUCN All rights reserved.