Recalls Of 2010 MERTZ HALLIBURTON

Click to view content

Campaign NumberRecall InitiatorPotentially AffectedComponentsManufacturerAutomotive ManufacturerReport Received DateRecall DescriptionConsequence Summary
11V555000ODI257SERVICE BRAKES, AIR:SLACK ADJUSTERSMERTZ MANUFACTURING, LLCMertz Manufacturing, Inc.2011-11-10MERTZ IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 HALLIBURTON TRAILERS MANUFACTURED FROM NOVEMBER 2010, THROUGH MARCH 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS. IF THE SLACK ADJUSTER HOUSING WERE TO BREAK, THE WHEEL BRAKE TO WHICH THE SLACK ADJUSTER IS ATTACHED WOULD NO LONGER FUNCTION, CAUSING THE VEHICLE TO HAVE REDUCED BRAKING CAPACITY AND, IF MOUNTED ON THE STEER AXLE, THE VEHICLE COULD PULL TO ONE SIDE, POSSIBLY RESULTING IN A CRASH.

The chart shows the type and proportion of 2010 MERTZ HALLIBURTON recalls initiated so far. So far, 257 2010 MERTZ HALLIBURTON are at risk of recall

SERVICE BRAKES, AIR:SLACK ADJUSTERS: 100%

Why You Should Get a Car History Report?

hide issue

1 in 4 used cars sold hide a potential issue

write off

1 in 16 cars have been recorded as a write off

stolen

every 9 mins a vehicle in Australia is stolen

Takata airbag recall

1 in 10 cars under a Takata airbag recall

odometer discrepancy

1% have evidence of an odometer discrepancy

organization

AUCN is Australia's best car history report provider

Data From:

Q&A

  • What is a Car Recall?

    Automotive recall is the process in which a vehicle manufacturer or government agency requests that a vehicle owner return the vehicle to a repair facility for the purpose of correcting a safety defect or non-compliance with federal safety standards. This process is initiated by the manufacturer or government agency when it is determined that a safety defect or non-compliance with federal safety standards exists in a particular vehicle or group of vehicles. The vehicle owner is notified of the recall by mail, and the repair is performed at no cost to the owner. The goal of an automotive recall is to prevent accidents and injuries caused by the defect or non-compliance issue.

  • Can I Use My VIN Number To Check For Recalls?

    Yes, you can use your vehicle identification number (VIN) to check for recalls. Most vehicle manufacturers have a website or a phone number that you can use to check for recalls using your VIN. In addition, we also provide recall inquiry, you only need to provide REGO or VIN to get a vehicle report

  • How to Check Recalls by Rego?

    Some vehicle recalls may even pose a major threat to the lives of drivers and passengers, such as the Takata airbag recall. Check the recalls of your car is necessary.

  • How to Check for a Takata Airbag Recall?

    Takata airbag recall is a recall of vehicles equipped with Takata airbag inflators. The recall was initiated by the National Highway Traffic Safety Administration (NHTSA) in 2014 and has since expanded to include millions of vehicles from various manufacturers. The recall was necessary because it was discovered that the Takata airbag inflators could rupture upon deployment, potentially causing metal shards to be propelled into the vehicle cabin, resulting in serious injury or death to the vehicle occupants. The NHTSA recommends that vehicle owners check for recalls on their vehicles and have any identified defects corrected as soon as possible to ensure their safety.

    Users can use our online service to check whether a vehicle is affected by the Takata airbag recall.

Image

Copyright © 2022.AUCN All rights reserved.