Campaign Number | Recall Initiator | Potentially Affected | Components | Manufacturer | Automotive Manufacturer | Report Received Date | Recall Description | Consequence Summary |
---|---|---|---|---|---|---|---|---|
00V419001 | ODI | 268229 | FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 2000-12-15 | VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL. | FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE. |
95V222002 | ODI | 27000 | VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 1995-11-22 | LEAVES AND OTHER FOREIGN MATERIAL CAN ENTER THROUGH THE COWL PANEL AIR INTAKE DURING OPERATION OF THE FRONT HEATER AND/OR AIR CONDITIONING SYSTEM RESULTING IN A BUILD-UP OF MATERIAL IN THE PLENUM. THIS CAN LEAD TO NOISE, ODORS, OR IN SOME CASES, IGNITION OF THESE MATERIALS. | A VEHICLE FIRE COULD OCCUR. |
92V172002 | MFR | 4900 | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 1992-12-02 | FUEL FILLER HOSES MAY HAVE BEEN CUT PRIOR TO INSTALLATION BY A UTILITY KNIFE USED TO OPEN THE SHIPPING BOX. | FUEL LEAKAGE CAN RESULT IF THE CUT EXTENDED THROUGH THETHICKNESS OF THE HOSE WALL. LEAKING FUEL CAN RESULT IN A FIRE IF EXPOSEDTO A SOURCE OF IGNITION. |
92V133001 | MFR | 1500 | SEAT BELTS | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 1992-09-21 | ONE OR BOTH OF THE BOLTS SECURING THE AUTOMATIC SEAT BELT RESTRAINT SYSTEM TRACKS TO THE B-PILLARS WERE NOT ADEQUATELY TIGHTENED. | THIS CONDITION CAN RESULT IN THE AUTOMATIC SEAT BELTSYSTEM TRACK JOINTS HAVING LESS THAN DESIGN STRENGTH, AND INCREASE THE RISK OFINJURY TO THE SEAT OCCUPANT IN THE EVENT OF A COLLISION OR SUDDEN STOP. |
92V132001 | MFR | 500 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 1992-09-21 | THE SERVICE BRAKE MASTER CYLINDER WAS NOT PROPERLY ASSEMBLED OR COULD HAVE BEEN DAMAGED BY THE EVACUATION AND FILLING OF THE BRAKE SYSTEM AT THE ASSEMBLY PLANT. | THIS CAN RESULT IN A PARTIAL BRAKE SYSTEM FAILURE DUE TOINTERNAL MASTER CYLINDER LEAKAGE WHICH CAN CAUSE LOSS OF BRAKING ON TWO OF THEFOUR WHEELS. IF THIS OCCURS, THERE WOULD BE INCREASED BRAKE PEDAL TRAVEL, HIGHERPEDAL EFFORTS AND INCREASED STOPPING DISTANCES. |
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY: 20% VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: 20% FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS: 20% SEAT BELTS: 20% SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER: 20%
Automotive recall is the process in which a vehicle manufacturer or government agency requests that a vehicle owner return the vehicle to a repair facility for the purpose of correcting a safety defect or non-compliance with federal safety standards. This process is initiated by the manufacturer or government agency when it is determined that a safety defect or non-compliance with federal safety standards exists in a particular vehicle or group of vehicles. The vehicle owner is notified of the recall by mail, and the repair is performed at no cost to the owner. The goal of an automotive recall is to prevent accidents and injuries caused by the defect or non-compliance issue.
Yes, you can use your vehicle identification number (VIN) to check for recalls. Most vehicle manufacturers have a website or a phone number that you can use to check for recalls using your VIN. In addition, we also provide recall inquiry, you only need to provide REGO or VIN to get a vehicle report
Some vehicle recalls may even pose a major threat to the lives of drivers and passengers, such as the Takata airbag recall. Check the recalls of your car is necessary.
Takata airbag recall is a recall of vehicles equipped with Takata airbag inflators. The recall was initiated by the National Highway Traffic Safety Administration (NHTSA) in 2014 and has since expanded to include millions of vehicles from various manufacturers. The recall was necessary because it was discovered that the Takata airbag inflators could rupture upon deployment, potentially causing metal shards to be propelled into the vehicle cabin, resulting in serious injury or death to the vehicle occupants. The NHTSA recommends that vehicle owners check for recalls on their vehicles and have any identified defects corrected as soon as possible to ensure their safety.
Users can use our online service to check whether a vehicle is affected by the Takata airbag recall.
Copyright © 2022.AUCN All rights reserved.