| Campaign Number | Recall Initiator | Potentially Affected | Components | Manufacturer | Automotive Manufacturer | Report Received Date | Recall Description | Consequence Summary |
|---|---|---|---|---|---|---|---|---|
| 95V103002 | ODI | 2730462 | SEAT BELTS:FRONT:BUCKLE ASSEMBLY | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 1995-05-24 | THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY. | THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH. |
| 94V031000 | ODI | 33000 | ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 1994-02-25 | ENGINE COMPARTMENT FIRES AND OTHER THERMAL INCIDENTS HAVE OCCURRED ON VEHICLES WHICH HAD RECEIVED ALL OF THE REMEDIES PROVIDED BY A PREVIOUS SAFETY-RELATED RECALL (NHTSA CAMPAIGN NO. 93V036000). THE FIRES ARE ATTRIBUTED TO ERRORS IN INSTALLING THE REMEDY SPECIFIED IN THE RECALL. | IF THE REMEDY SPECIFIED FOR RECALL 93V036000 WAS NOT PERFORMED CORRECTLY OR THE VEHICLE HAS NOT RECEIVED THE REMEDY, A FIRE COULD OCCUR. |
| 87V109000 | MFR | 10025 | ENGINE AND ENGINE COOLING:ENGINE | NISSAN NORTH AMERICA, INC. | Nissan North America, Inc. | 1987-07-16 | VALVE COVER GASKET MAY LEAK OIL. | OIL MAY DRIP ON EXHAUST MANIFOLD AND IF ENGINE ISOPERATED UNDER SEVERE CONDITION OR OPERATED AT CONTINUOUSLY HIGH SPEEDS. THEMANIFOLD MAY BECOME HOT ENOUGH TO IGNITE THE OIL. THIS COULD RESULT IN ANENGINE COMPARTMENT FIRE. |
SEAT BELTS:FRONT:BUCKLE ASSEMBLY: 33.333333333333% ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS: 33.333333333333% ENGINE AND ENGINE COOLING:ENGINE: 33.333333333333%
Automotive recall is the process in which a vehicle manufacturer or government agency requests that a vehicle owner return the vehicle to a repair facility for the purpose of correcting a safety defect or non-compliance with federal safety standards. This process is initiated by the manufacturer or government agency when it is determined that a safety defect or non-compliance with federal safety standards exists in a particular vehicle or group of vehicles. The vehicle owner is notified of the recall by mail, and the repair is performed at no cost to the owner. The goal of an automotive recall is to prevent accidents and injuries caused by the defect or non-compliance issue.
Yes, you can use your vehicle identification number (VIN) to check for recalls. Most vehicle manufacturers have a website or a phone number that you can use to check for recalls using your VIN. In addition, we also provide recall inquiry, you only need to provide REGO or VIN to get a vehicle report
Some vehicle recalls may even pose a major threat to the lives of drivers and passengers, such as the Takata airbag recall. Check the recalls of your car is necessary.
Takata airbag recall is a recall of vehicles equipped with Takata airbag inflators. The recall was initiated by the National Highway Traffic Safety Administration (NHTSA) in 2014 and has since expanded to include millions of vehicles from various manufacturers. The recall was necessary because it was discovered that the Takata airbag inflators could rupture upon deployment, potentially causing metal shards to be propelled into the vehicle cabin, resulting in serious injury or death to the vehicle occupants. The NHTSA recommends that vehicle owners check for recalls on their vehicles and have any identified defects corrected as soon as possible to ensure their safety.
Users can use our online service to check whether a vehicle is affected by the Takata airbag recall.
Copyright © 2022.AUCN All rights reserved.